Rugged-ridge Ultra Front Seat, Reclinable, Spice, 97-06 Jeep Wr Manuel d'utilisateur télécharger pdf

Contents:

(1) MultiMount Seat

(1) LH Plastic Adjuster Cover (4) M13 Flat Washer

(1) RH Plastic Adjuster Cover (4) M13 x 50mm Bolt

(2) Adjuster Knob

(4) Step Bracket (4) M13 Hex Nut

Page 1 of 4

Part Number: 13412.XX , 13414.XX , 1315.XX , 13416.XX

Seat Installation Instructions - MultiMount System (97-06 TJ) (84-01 XJ)

(4) M13 Nut Plate

Pg.1

Installation Instructions

Step 1: Remove the (4) bolts holding factory seats and riser to vehicle. Do Not discard bolts. Bolts will be

required to reinstall seat base to vehicle (Fig.1). Disconnect seat belt warning harness if equipped (Fig.2).

Step 2: Remove (4) M13 factory seat mounting nuts. These are the nuts used to secure the seat to seat riser.

Do Not Discard nuts. Nuts may be used later to reinstall new seats to factory seat riser.

(96-01 XJ, 97 - 02 TJ) : (4) bolts located under seat secure seat to riser. (Fig.3)

(03 - 06 TJ/LJ) : (4) bolts secure seat cushion to lower seat frame. (2) Bolts are located on the back

of the seat under seat fabric (Fig.4). (2) bolts are located on the sides of the seat

under seat fabric (Fig.5). Lift lower seat cushion and remove (4) bolts securing

seat to riser (Fig.6).

(84 - 96 XJ) : Disconnect lower seat cushion from rear of seat base. Flip lower seat cushion

forward and remove 4 bolts holding seat and

seat base to riser.

Step 3: Disconnect factory seat adjuster cable from seat riser if equipped.

(97 - 02 TJ) : Pop seat cable plastic clip o seat riser connection (Fig.7).

(03-06) TJ/LJ): Push seat adjuster cable out of riser mounting bracket (Fig8). Disconnect cable

from seat.

(4) Spacer

Please read instruction completely prior to installation. Conrmation of your model vehicle and seat

conguration is needed for proper installation. Instructions will give general installation information. Specic

vehicle information will be called out where needed.

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5 Fig.6 Fig.7

Fig.8

(all models)

1 2 3 4

Résumé du contenu

Page 1 - Contents:

Contents:(1) MultiMount Seat(1) LH Plastic Adjuster Cover (4) M13 Flat Washer(1) RH Plastic Adjuster Cover (4) M13 x 50mm Bolt(2) Adjuster Knob

Page 2 - Page 2 of 4

Page 2 of 4Part Number: 13412.XX, 13414.XX, 1315.XX, 13416.XX Seat Installation Instructions - MultiMount System (97-06 TJ) (84-

Page 3 - Page 3 of 4

Page 3 of 4Part Number: 13412.XX, 13414.XX, 1315.XX, 13416.XX Seat Installation Instructions - MultiMount System (97-06 TJ) (84

Page 4 - Page 4 of 4

Page 4 of 4Part Number: 13412.XX, 13414.XX, 1315.XX, 13416.XX Seat Installation Instructions - MultiMount System (97-06 TJ) (84-

Commentaires sur ces manuels

Pas de commentaire

Rugged-ridge Ultra Front Seat, Reclinable, Spice, 97-06 Jeep Wr Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Rugged-ridge Ultra Front Seat, Reclinable, Spice, 97-06 Jeep Wr. Rugged Ridge Ultra Front Seat, Reclinable, Spice, 97-06 Jeep Wrangler (TJ) User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Rugged-ridge Ultra Front Seat, Reclinable, Spice, 97-06 Jeep Wr